Ubomi obude obuRisayilishwe ngaphandle Ingubo yeplastiki yePlastiki edibeneyo

Inkcazo emfutshane:

Ubunini beemveliso: WPC ukuthoba

Into No: LH145H21C

Intlawulo: TT / LC

IxabisoI $ 2.25 / M

Imvelaphi yemveliso: China

Umbala: Cedar, Umsi White, Ilitye, Granite, njl.

Ukuhambisa iZibuko: Izibuko laseShanghai

Ixesha lokukhokhela: Iintsuku eziyi-8-16


Iinkcukacha Product

Inkqubo yoFakelo

FAQ

Iimpawu zemveliso

Igama

Ukuhamba kweWPC

Umba

LS145H21

Icandelo

 a10

Ububanzi

Ubukhulu:

Ukutyeba

21mm

Ubunzima

2670g / m

Ukuxinana

1350kg / m³

Ubude

2.9m 3.6m okanye wena

Ukusetyenziswa

Imbonakalo-mhlaba, iPaki, Indawo entle

Unyango lomphezulu

Isanding / iBushed

Isiqinisekiso

Iminyaka emihlanu

 

Imveliso

  1. ● I-WPC yokuhombisa eyona nto iphambili yi-PE, iintsinga zomthi kunye nezongezelelo. Ukuhonjiswa kwethu kwe-WPC kudumile kwihlabathi liphela njengoko sisebenzisa izinto zendalo.
  2. ● Ukuhonjiswa kweWPC yethu intle kwaye intle ubunjani bomthi wokutya okuziinkozo, uchukumise ufakelo olulula, ngaloo ndlela unokuhlangabezana neemfuno ezahlukeneyo zabathengi.Ingachetywa, ibethelelwe, igrunjwe kwaye isikwe ukuze ilungele izincedisi zeenkcukacha ezahlukeneyo, ezinje ngomhlaba, igadi yangaphandle, ipaki, ivenkile enkulu, njl.
  3. ● Ukuhonjiswa kwethu kwe-WPC kulungele ukusingqongileyo, kunokuphinda kusetyenziswe kwakhona kwaye akukho enye ikhemikhali eyingozi, ayifuni ukupeyinta, akukho glu kunye nolondolozo olusezantsi.
  4. ● I-Decking yethu inesimo sezulu esifanelekileyo, inokuba ilungile ukusuka kwi -40 ukuya kwi-60 ℃ .Ukuhlobisa i-WPC yethu kunokusetyenziswa kwihlabathi liphela.Ngenxa yokuba iibhodi zethu zinokumelana nemozulu, zichasene nesiliphu, zincinci iintanda, i-warp, zinganxibanga zihlangu. .Plus UV additive yenza iibhodi zethu ukumelana UV, fade ukumelana kunye durable.Good dimension uzinzo nxamnye ukufuma kunye nobushushu.

8668fc8f 4cecbcf1

 

Ishiti yedatha

Ukucaciswa kwemveliso

Umba

Imigangatho

Iimfuneko

Iziphumo

Slip Resistance Dry

EN 15534-1: 2014 Icandelo6.4.2 CEN / TS 15676: 2007 EN 15534-4: 2014 Icandelo 4.4

Ixabiso lePendulum≥36

Ulwalathiso lobude: Kuthetha i-72, iMin 70 Isalathiso esithe tyaba: Kuthetha i-79, iMin 78

Isiliphu Resistance Emanzi

EN 15534-1: 2014 Icandelo6.4.2 CEN / TS 15676: 2007 EN 15534-4: 2014 Icandelo 4.4

Ixabiso lePendulum≥36

Ulwalathiso lobude: Kuthetha i-46, iMin 44 Isalathiso esithe tyaba: Kuthetha 55, Min 53

Ukuwa kokuchasana nefuthe lobunzima

EN 15534-1: 2014 Icandelo7.1.2.1 EN 15534-4: 2014 Icandelo 4.5.1

Akukho nanye kwimikhombandlela eya kusilela ngobude bokuqhekeka≥

I-10mm okanye ubunzulu bendalo eseleyo ≥0.5mm

Ubungakanani beMax.Crack (mm): Akukho bunzima bokubakho Ubuyiselo olushiyekileyo (mm): 0.31

Iimpawu zeFlexural

EN15534-1: 2014 IsiHlomeloA EN 15534-4: 2014 Icandelo 4.5.2

-F'max: Kuthetha -3300N, Min≥3000N

-Ukuchazwa phantsi komthwalo we-500N kuthetha≤2.0mm, Max≤2.5mm

Amandla okugoba: 27.4 MPa Modulus ye-elasiticity: 3969 MPa Ubuninzi bomthwalo: Kuthetha i-3786N, iMin 3540N ukuphambuka kwi-500N: Kuthetha: 0.86mm, Max: 0.99mm

Ukuziphatha ngokuziphatha

EN 15534-1: 2014 Icandelo7.4.1 EN 15534-4: 2014 Icandelo 4.5.3

Isithuba esisebenzayo siyasebenza: Kuthetha ∆S≤10mm, Max ∆S≤13mm, Kuthetha ∆Sr≤5mm

Ububanzi: 330mm, Kuthetha ∆S 1.65mm, Max 1.S 1.72mm, Kuthetha ∆Sr 1.27mm

Ukudumba nokufunxwa kwamanzi

EN 15534-1: 2014 Icandelo8.3.1 EN 15534-4: 2014 Icandelo 4.5.5

Kuthetha Ukudumba: ≤4% kubukhulu, ≤0.8%

ububanzi, -0.4% ubude Ukudumba okuphezulu: ≤5% ubukhulu, .21.2% ububanzi, ≤0.6% ubude ukufunxwa kwamanzi: Kuthetha: ≤7%, Max: ≤9%

Kuthetha Ukuvuvukala: 1.81% ubukhulu, 0.22% ububanzi, 0.36% ubude Ukuvuvukala: 2.36% ubukhulu, 0.23% ububanzi, 0.44% ubude Ukuxutywa kwamanzi: Kuthetha: 4.32%, Max: 5.06%

Uvavanyo lokubilisa

EN 15534-1: 2014 Icandelo8.3.3 EN 15534-4: 2014 Icandelo 4.5.5

Ukufunxwa kwamanzi ngobunzima: Kuthetha ukuba yi-7%, iMax≤9%

Ukufakwa emanzini ngokobunzima: Kuthetha: 3.06%, uMax: 3.34%

Umgama okwandisiweyo okwandisiweyo kwe-thermal

EN 15534-1: 2014 Icandelo9.2 EN 15534-4: 2014 Icandelo 4.5.6 ISO 11359-2: 1999

50 × 10⁻⁶ K⁻¹

34.2 x10⁻⁶ K⁻¹

Ukuchasana nokungeniswa

EN 15534-1: 2014 Icandelo7.5 EN 15534-4: 2014 Icandelo 4.5.7

Ubulukhuni bukaBrinell: I-79 MPa yereyithi yokubuyisela kwimeko yesiqhelo: iipesenti ezingama-65

Ukuguqulwa kobushushu

EN 15534-1: 2014 Icandelo9.3 EN 15534-4: 2014 Icandelo 4.5.7 EN 479: 2018

Uvavanyo lokushisa: 100 ℃ Kuthetha: 0.09%


  • Egqithileyo
  • Okulandelayo:

  • Isikhokelo sokufakwa kweBhodi

    Ngofakelo olufanelekileyo kunye nokhathalelo, iimveliso zeenkuni ziqinisekisiwe ukubonelela ngeminyaka yokuphila ngaphandle. Ukufezekisa ufakelo olungenangxaki lweemveliso zeenkuni:

    -Cebisana ngeekhowudi zokwakha zengingqi ngaphambi kofakelo.

    -Zazi ngemiyalelo yofakelo.

    -Qiniseka ukuba unazo zonke izixhobo kunye nezinto eziyimfuneko-njengoko zidwelisiwe kwiphepha lokufundisa.

    Ukugcina nokuPhatha

    -Ungaze ulahle izinto zeenkuni xa usothula.

    -Gcina kwindawo ethe tyaba kwaye ugqume ngezinto ezingagudluki.

    -Xa uphethe iiplanga, qhubeka nokuxhasa okungcono.

    Bhekisa kwimiyalelo yokufaka isikhokelo esongezelelweyo kwimveliso nganye.

    Unonophelo kunye nokuPhatha iziKhokelo zokuHamba

    Ukunciphisa ukukrwela, iincindi, ukusika kunye nemijelo, kunye nokugcina ubuhle beplanga. Landela le migaqo:

    -Ungashenxisi iidesika zomnye nomnye xa uzihambisa. Xa uzisusa kwiyunithi, phakamisa iidesika kwaye uzimise phantsi.

    -Ungazityibilikisi izixhobo okanye utsale izixhobo ngapha nangapha kweekhonkco ngexesha lokwakha.

    Gcina umphezulu weepakethe ukhululekile kwinkunkuma yokwakha. Ukuthwala ubumdaka kunye nokwakhiwa kwenkunkuma kuwo wonke umphezulu, onegalelo ekukrwemeni komhlaba.

    Ulwazi olubalulekileyo

    -Ukuba usebenza ngemveliso yeenkuni okanye nasiphi na isixhobo sokwakha, qiniseka ukunxiba iimpahla ezifanelekileyo kunye nezixhobo zokhuseleko.

    -Zizo zonke iimveliso zomthi, izixhobo zomgangatho zokusebenza zinokusetyenziswa, ngokwemiyalelo yomenzi esebenzayo.

    -Scrap inokulahlwa ngobutyobo obuqhelekileyo bokwakha.

    -mthi unokuxhathisa ngokutyibilika okumanzi okanye owomileyo.

    -imithi inesakhelo sokufihla esakhelwe ngaphakathi kwaye kulula ukufaka iiklip zomthi.

    Izikhokelo ezikhawulezayo

    -Sebenzisa ubuncinci # 8 x 2-1 / 2 "ekumgangatho ophezulu oqatywe, insimbi engenasici okanye isiqwenga somgangatho.

    -Ukubumba kwangaphambili kuyadingeka kwimozulu ebandayo kwaye xa ungaphakathi kwe-1-1 / 2 ”yokuphela komgangatho

    -Ungasebenzisi iglu okanye i-caulk ukubopha iiplanga zomthi okanye ukutywina ngokudibeneyo phakathi kweeplanga ezimbini kunye nayiphi na enye indawo.Oku kuya kuthintela ukwanda kwendalo kunye nokuxinana kweeplanga kwaye kuya kuthintela ukuhanjiswa komgangatho.

    Ukungena komoya ngokufanelekileyo kuyafuneka

    -Ukunciphisa ukufuma okwakhiwa ngaphantsi komgangatho, kufuneka kubekho ubuncinci

    ye-12 ”indawo ephezulu engakhuselekanga yomoya oqhubekayo macala omathathu enqanawo ukuvumela ukungena komoya.

    Oku kufanele ukuba kubekwe nje emazantsi ezantsi edikeni.

    -Kwezinye izicelo ezinqongopheleyo, kubandakanya iidesika ezakhelwe kwikona yangaphakathi, umoya owongezelelweyo uya kufuneka apho idilesi ihlangana khona nesakhiwo. Ukungaphumeleli ukubonelela ngokungenisa umoya okwaneleyo kungakhokelela ekusileleni komphezulu womgangatho kwaye kuya kuyiphelisa iwaranti.

    Lisen Wood decking yoFakelo Imiyalelo

    Ungagcina ixesha lokwakha kunye neendleko ngokwenza uyilo, cwangcisa uhlahlo-lwabiwo mali lwezixhobo eziyimfuneko ngokwenkqubo yoyilo. Ungakhetha izinto zakho ngokwendlela iminqweno yakho kunye neentlobo ezininzi iinkuni ozikhethelayo, ukwakha iinkuni, ukusebenza ngomatshini zingasetyenziswa ukusika, sawing, ukubhola njalo njalo.

    1. Xa ufaka i-decking, okokuqala kuya kufuneka wenze lukhuni ukuzilungiselela kwangaphambili emhlabeni, emva koko ulungise i-joist kumhlaba owomileyo. Sicebisa inowuthi ye-joist ye-35-40cm. Isithuba seJoist sinokufutshane njengoko kuceliwe.image001
    2. Cinga ngezithuba ezi-3cm kwisakhiwo xa ufaka umgangatho.image002
    3. Ikhithi edibeneyo yokuhonjiswa kweenkuni ziimveliso zentsimbi engenasici. Ukubhola kufanele kube kuncinci kunobubanzi besikulufu esingu-3/4 ukuze kwandiswe izikhonkwane ezizibambayo.image003
    4. Ukunkqonkqoza ngobunono ngokusetyenziswa kwesando serabha ngexesha lokwakha ukuqinisekisa isithuba esilinganayo kunye nomphezulu wolwakhiwo oluhle.image004
    5. Ubude betyhidi buya kuchaphazeleka ngenxa yendawo enkulu yokwakha. Sincoma icandelo ukuba kubekho isithuba se-5mm xa icandelo elinqamlezileyo lifuneka.image005
    6. Ungayidibanisa i-groove kunye ne-joist ngezikrufu zokuzibamba ukuba iziqwengana azifumaneki kunxibelelwano lwe-joist kunye nokuhombisa.image006
    7. Khetha ibhodi ehambelana nayo ukuba ibe yibhodi ebukhali ngokobungakanani be-joist kunye nokuhombisa emva kokugqiba ulwakhiwo.image007

    Ufakelo Amakhiwane kliphu zeplastiki

    1. Xa ufaka i-decking, okokuqala kuya kufuneka wenze lukhuni ukuzilungiselela kwangaphambili emhlabeni, emva koko ulungise i-joist kumhlaba owomileyo. Sincoma isandi se-joist kwi-35-40 cm. Isithuba seJoist sinokufutshane njengoko kuceliwe.image008
    2. Cinga ngezithuba ezi-3cm kwisakhiwo xa ufaka umgangatho.image009
    3. Enye into yokudibanisa imithi kukuhonjiswa ngeplastiki. Ukubhola kufanele kube kuncinci kunobubanzi besikulufu esingu-3/4 ukuze kwandiswe izikhonkwane ezizibambayo.
      image010 image011
    4. Ukunkqonkqoza ngobunono ngokusetyenziswa kwesando serabha ngexesha lokwakha ukuqinisekisa isithuba esilinganayo kunye nomphezulu wolwakhiwo oluhle. image012 image013
    5. Ubude betyhidi buya kuchaphazeleka ngenxa yendawo enkulu yokwakha. Sincoma icandelo ukuba kubekho isithuba se-5mm xa icandelo elinqamlezileyo lifuneka.image014
    6. Ungayidibanisa i-groove kunye ne-joist nge-self-tapping screws ukuba iziqwengana azifumaneki kuqhagamshelo lwe-joist kunye nokuhombisa.image015
    7. Khetha ibhodi ehambelana nayo ukuba ibe yibhodi ebukhali ngokobungakanani be-joist kunye nokuhombisa emva kokugqiba ulwakhiwo.image016

    Faka i-decking eqinileyo

    1. Xa ufaka i-decking, okokuqala kuya kufuneka wenze lukhuni ukuzilungiselela kwangaphambili emhlabeni, emva koko ulungise i-joist kumhlaba owomileyo. Sincoma inqaku le-joist le-35-40cm. Isithuba seJoist sinokufutshane njengoko kuceliwe.image017
    2. Cinga ngezithuba ezi-3cm ukuya kwisakhiwo xa ufaka umgangatho owomeleleyo Fakela umgangatho oqinileyo ngezikhonkwane ezibonakalayo kwaye ubeke isikhonkwane se-2cm emaphethelweni.image018
    3. Phinda inkqubo.image019
    4. Khetha ibhodi ehambelana nayo ukuba ibe yibhodi ebukhali ngokobungakanani be-joist kunye nokuhombisa emva kokugqiba ulwakhiwo.image020

    Q: Sithini isivuno sakho semveliso? Yenziwe njani loo nto?

    A: Imveliso yethu yesivuno ingaphezulu kwe-98%, kuba siya kuwulawula umgangatho ekuqaleni, ukusukela ekuqaleni kwemathiriyeli, zona i-QC ziya kulawula umgangatho xa zisenziwa, kunye negcisa liya kujonga kwaye lihlaziye ifomula rhoqo.

    Q: Lide kangakanani ixesha lokuphila kweemveliso ze-WPC?

    A: Imalunga nama-25-30 eminyaka phantsi kweemeko ezifanelekileyo.

    Q: Leliphi ixesha lokuhlawula oza kulamkela?

    A: Ixesha lokuhlawula yi-T / T, i-Western Union njalo njalo.

    Q: Thelekisa neenkuni, yintoni inzuzo yeemveliso ze-WPC?

    A: 1, Iimveliso ze-WPC zinobuhlobo ngokupheleleyo, zi-100% ezinokuphinda zisebenze.

    Okwesibini, iimveliso ze-WPC azinamanzi, ubungqina bokufuma, ukungabinambuzane kunye nokuchasa ukungunda.

    Okwesithathu, iimveliso ze-WPC zinamandla aphezulu, ukunxiba okuphantsi kunye nokukrazula, kukungadumba, akukho deformation kwaye akuphukanga

    Q: Ngaba iimveliso ze-WPC zifuna ukupeyinta? Nguwuphi umbala onokubonelela ngawo?

    A: Njengomahluko phakathi kweenkuni, iimveliso zeWPC ngokwazo zinombala wazo, zifuna ukupeyinta okungaphezulu. Ngokubanzi, sibonelela ngemibala ephambili eyi-8 njengoMsedare, tyheli, ipayini ebomvu, umthi obomvu, omdaka, ikofu, ngwevu okhanyayo, grey eluhlaza. Kananjalo sinokwenza umbala okhethekileyo ngesicelo sakho ngasinye.

    Q: Kude kube nini usenza ukungunda entsha yeemveliso ezintsha?

    A: Ngokubanzi, sidinga iintsuku ezili-15 ukuya ku-21 ukwenza ukungunda okutsha, ukuba kukho umahluko, iintsuku ezingama-5-7 kufuneka zenziwe uhlengahlengiso oluncinci.

    Q: Ngaba umthengi kufuneka ahlawule umrhumo wokubumba omtsha? Yimalini? Ngaba siza kuyibuyisa le ntlawulo?

    A: Ukuba umthengi ufuna ukwenza ukungunda okutsha, ewe kufuneka ahlawule umrhumo wokubumba kuqala, iya kuba ngama-2300- $ 2800. Kwaye siya kuyibuyisa le mali xa umthengi ebeka iiodolo ezintathu zesikhongozeli esingu-20GP.

    Q: Leliphi icandelo leemveliso zakho ze-WPC?

    A: Icandelo lethu leemveliso ze-WPC ngama-30% i-HDPE + 60% yeeFibers zeWood + 10% zeZongezo zeKhemikhali.

    Umbuzo: Uhlaziya njani iimveliso zakho?

    A: Siza kuhlaziya iimveliso zethu inyanga nenyanga.

    Q: Uthini umgaqo woyilo wembonakalo yemveliso yakho? Zithini iinzuzo?

    A: Iimveliso zethu ziyilo ekusebenzeni kobomi, njenge-anti-slip, ukumelana nemozulu, ukunganyangeki, njl.

  • Bhala umyalezo wakho apha uze uyithumele kuthi